Paver & Concrete Sealing in Tacoma and the Tacoma area
Rain or Shine cleans and seals paver patios, walkways, driveways and concrete in Tacoma and nearby cities. We pressure wash the surface first, treat oil, rust and organic stains, let it dry, then apply sealer so water and grime have a harder time soaking in.
What paver and concrete sealing covers
This service is for the hard surfaces around your home in Tacoma: paver patios, brick paver walkways, concrete driveways, sidewalks and slabs. We call it paver cleaning and sealing, or concrete sealing, depending on the surface. Either way, the job is two parts. First we get the surface clean. Then we put down a sealer that helps protect it from water, salt and stains.
Cleaning comes first because sealer locks in whatever is under it. We pre-treat oil, rust and moss stains, then pressure wash with a rotary surface cleaner. That tool spins at an even height, so you do not end up with stripes or wand marks. Pavers and concrete can take this kind of pressure. Your siding and roof would get a soft wash instead, but flatwork needs the extra cleaning power.
- Paver patios and walkways
- Concrete driveways
- Sidewalks, slabs and other concrete flatwork
Planning your sealing day around the weather
Rain is the main thing that decides when we seal. The surface has to dry fully after washing, and the sealer needs dry weather to cure. In the Tacoma area, that means we plan around the forecast and may move your date if rain is coming. A drier stretch of the year is the easiest time to book.
On the day, we pre-wet and cover nearby plants, clean, wait for the surface to dry, and then seal. You do not need to be home if there is an outdoor spigot. Once we finish, we will tell you how long to keep people, pets and cars off. Rain or Shine is family-owned, licensed and insured, and has served the area since 2002. Call Timothy at (253) 364-7210 for a free quote, any day from 7:00 AM to 8:00 PM.

